The cold storage door is the core component of the cold storage system, and its performance directly affects the insulation effect and energy consumption of the cold storage. In order to ensure the efficient operation of the cold storage door and extend the service life, the following are the daily maintenance and precautions:
2.Hinges and pulleys: Both are responsible for opening and closing the door. Check whether the hinge screws are loose every week, and add appropriate amount of lubricating oil to the hinge and pulley to ensure smooth switch. If the pulley is seriously worn, it should be replaced in time to avoid affecting the operation and causing safety risks.
3.Door lock: check whether it can be normally locked and opened every day, repair and replace it in time if there is any delay or abnormality, and inject lubricant into the lock core regularly to prevent rust.
2.Check closing speed: normal closing speed should be stable and moderate. If it is too fast or too slow, the controller parameters need to be adjusted, otherwise the seal and door body will be affected.
3.Temperature and humidity measurement: pay attention to the temperature and humidity near the door. If the temperature is significantly higher than the warehouse, or the frost is serious, it may be bad sealing, to solve in time.
2.Handle goods carefully to avoid hitting the door.
3.Be sure to cut off the power supply to ensure safety.
Henan Shunwei Energy Saving Technology Co., Ltd. specializes in supplying cold storage equipment, providing technical support and maintenance guidance. If you encounter any problems in maintenance, please contact us to ensure the normal operation of your cold storage equipment.
Cleaning and maintenance
The humidity of the cold storage is high, and the door is easy to gather water vapor and dust. Clean thoroughly with a soft damp cloth at least once a week, focusing on door cracks, door frames and seals to remove dust, stains and frost. In case of stubborn stains, mild cleaning agents can be used, but do not use corrosive products, so as not to damage the door body. Inspection of parts
1.Seal: it is related to the sealing effect of the cold storage door. Check every day for damage, aging, deformation or falling off, and replace the problem in time to prevent air conditioning leakage. 2.Hinges and pulleys: Both are responsible for opening and closing the door. Check whether the hinge screws are loose every week, and add appropriate amount of lubricating oil to the hinge and pulley to ensure smooth switch. If the pulley is seriously worn, it should be replaced in time to avoid affecting the operation and causing safety risks.
3.Door lock: check whether it can be normally locked and opened every day, repair and replace it in time if there is any delay or abnormality, and inject lubricant into the lock core regularly to prevent rust.
Monitoring of operation
1.Listen to the sound of operation: open and close the door, if there is harsh, friction or crash, indicating that the parts may be faulty, to immediately stop for investigation and maintenance. 2.Check closing speed: normal closing speed should be stable and moderate. If it is too fast or too slow, the controller parameters need to be adjusted, otherwise the seal and door body will be affected.
3.Temperature and humidity measurement: pay attention to the temperature and humidity near the door. If the temperature is significantly higher than the warehouse, or the frost is serious, it may be bad sealing, to solve in time.
Notes
1.Do not stay or lean on the door when it is opened to prevent the door from accidentally closing and injuring people. 2.Handle goods carefully to avoid hitting the door.
3.Be sure to cut off the power supply to ensure safety.
Henan Shunwei Energy Saving Technology Co., Ltd. specializes in supplying cold storage equipment, providing technical support and maintenance guidance. If you encounter any problems in maintenance, please contact us to ensure the normal operation of your cold storage equipment.